Author: birderdiane526
Subject: Electric questions
Posted: 07 Sep 2016 at 9:24pm
Great to hear your suggestion, Furpod, about using jumper cables versus the 7 pin. Thanks.
Question for you. We have a 12v flooded battery and there is water in it. Why does our battery not hold a charge? We charged to full with our solar and by night fall, we were down to one dot on the control panel (or 10.2v from 14.6v). We were away from the pod and therefore nothing was running other than the small draws of the detectors and fridge panel lights (fridge is on propane). We would appreciate any help. Thanks.
Subject: Electric questions
Posted: 07 Sep 2016 at 9:24pm
Great to hear your suggestion, Furpod, about using jumper cables versus the 7 pin. Thanks.
Question for you. We have a 12v flooded battery and there is water in it. Why does our battery not hold a charge? We charged to full with our solar and by night fall, we were down to one dot on the control panel (or 10.2v from 14.6v). We were away from the pod and therefore nothing was running other than the small draws of the detectors and fridge panel lights (fridge is on propane). We would appreciate any help. Thanks.