Author: ChetC
Subject: Quick How To: Installing BAL Hide-A-Spare
Posted: 19 Oct 2016 at 3:59pm
Subject: Quick How To: Installing BAL Hide-A-Spare
Posted: 19 Oct 2016 at 3:59pm
| Originally posted by voisj Just finished, took 1 hour, thanks for the helpful info! I only had 1 problem, and that was the tire was pushing so hard against the floor I could not get it up high enough to latch, and had to lower the first bracket just as you described the mounting of the second one. It takes some force but works now. Maybe the 15" hood river mud and snow tires are wider? Thanks again! John |
Ahh! Mine is not a Hood River edition, so you are no doubt correct on the tire width difference. I wouldn't worry about it pushing up on the floor of the camper as it will do nothing but offer support to the center of the floor, which has a little give anyway. Glad it helped!