Author: StephenH
Subject: Surge protector installation
Posted: 06 Feb 2017 at 2:41pm
That is correct. There is only a thin panel held on by a couple of screws that hides the power connector inside the cabinet. Remove those screws, and the back side of the power connection and wires are right there along with the external shower fittings and the satellite and cable antenna connectors, although both top and bottom panels might need to be removed to access everything easily.
Subject: Surge protector installation
Posted: 06 Feb 2017 at 2:41pm
| Originally posted by furpod On 179's, the #1 place to install is behind the power distribution center, which is in the base of the cabinet on your right as you enter the Pod. The power entry wire does not run under the bed. 179's power cord connects at the rear street side corner as I recall. |
That is correct. There is only a thin panel held on by a couple of screws that hides the power connector inside the cabinet. Remove those screws, and the back side of the power connection and wires are right there along with the external shower fittings and the satellite and cable antenna connectors, although both top and bottom panels might need to be removed to access everything easily.