Author: B&K-Joslin
Subject: Mods to R-Pod 179
Posted: 26 May 2016 at 8:35pm
I made 3/4 x 3/4 x 10 square rods to hold up the sides of the metal shelves. The shelf was made, using "Closest Maid" wire shelves. I measured the tubs, that I planed to use for height. Added an extra 1/4" or so, to have 6 tubs. As for the screws I used 1" drywall screw with glue on the wall side.
Subject: Mods to R-Pod 179
Posted: 26 May 2016 at 8:35pm
I made 3/4 x 3/4 x 10 square rods to hold up the sides of the metal shelves. The shelf was made, using "Closest Maid" wire shelves. I measured the tubs, that I planed to use for height. Added an extra 1/4" or so, to have 6 tubs. As for the screws I used 1" drywall screw with glue on the wall side.